Testimonials
Lorem ipsum dolor sit

Innovation is Key

Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh euismod

tincidunt ut laoreet dolore magna aliquam erat volutpat, ut wisi enim ad minim veniam

"Well done"

"Hi, The P5000V3, production batches A3515 A4615 passed the HATS test with success 500 cycles - 6 cycles Reflow 260 degrees and did not undergo more than 4% of the change of resistance. Please distribute to all those involved. Well done. Regards, "

Yehuda N. December 27, 2015

"Thank you for the excellent service!"

"Hi, I would like to thank you for the excellent service that you gave in researching the failure and the malfunction of the circuit. You carried out at our request the cross sections of the circuit and in a meeting at your site Natan and Michel gave up their time and helped us to investigate the problem in depth. At the end of the day we proved (also with the help of ultrasonic cleaning with IPA) that the problem was not within the circuit but rather on the surface. Again many thanks to everyone! "

Danny G. December 24, 2015

"It was simply great to work with Nistec!"

"It was simply great to work with Nistec. The service and warmth of Orly and of everyone that we met during the assembly was very high. Thank you very much. "

Inbal A. October 6, 2015

"Thank you for all the efforts that you invested!"

"Hi Ronny and Yvgeny Attached are photos of the board that you designed for us. The circuits are assembled and are in working excellent! Thank you for all the efforts that you invested. Yours,"

Or S. July 26, 2015

"Well done, keep going!"

"Hi everyone, I wanted to update you that the P5400V2 circuit board polymide / layer intervals 2.5 / copper filling passed the HATS tests with excellence, 1000 cycles without batting an eyelid. Well done, keep going! (Regards to Naftali who has been chasing me for two years to make a circuit board with copper filling) Regards"

Yehuda N. July 21, 2015

" I hope to continue with the fruitful cooperation!"

"During last week we received the cards from the application contractor, to date we have tested one card and it seems to be working fine. The rest of the csrds will be activated and tested in due course. I would like to thank you and the rest of those engaged in the work for their cooperation and support of the project from the first moment and until its delivery on the date determined and even slightly earlier. In particular I wanted to mention the help and contribution of Simon in coordinating the work and the production abilities of Eltek and the advise in determining the stack up. I hope to continue with the fruitful cooperation,"

Uzy B. 19 July, 2015

"Caring and professional investment!"

"Thank you very much for the caring and professional investment and the attention to the small details."

Gil C. July 16, 2015

"Looking forward to coming back and assembling with you thousands of units. Thank you!"

"I wanted to say thank you! Thank you to Michael for his professional support throughout the preparation of the circuit. Thank you to Arbel and Elad for the wonderful service and their warm interactions. A huge thank you to Olga for the dedicated and professional support throughout the assembly process and for her caring and ensuring the assembly of each and every component until the very last one although the kit was restricted with short tapes that I brought which did not have countable components. Thank you for the service and the warm dealings on the day of the assemblies and for the training and presentation of the process. Over and above the professional, efficient and speedy work, I must mention that on the day that I spent at your company during the assembly of the circuit I felt a real sense of family. In the coming two weeks we are performing tests on the circuit. I will update you regarding the progress. Looking forward to coming back and assembling with you thousands of units. Thank you!"

Alon C. June 18, 2015

"Great job!!!"

Many Thanks - you have done great job!!! I'm hope we will get 'Smooth Bring-Up'.

Yosef T. April 20, 2015

"Professional work & Personal attention"

Thank you very much for your professional work and the personal attention!

Izhak G. March 26, 2015

"Thank you very much"

"Hi Michael, Thank you very much for the advice, it seems that the Americans have something to learn (from Nistec). This is a creative solution, which enables our engineers freedom of action in planning large circuits. Thank you very much."

Zeev R. February 12, 2015

Innovation is Key

Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh euismod

tincidunt ut laoreet dolore magna aliquam erat volutpat, ut wisi enim ad minim veniam

"Well done"

"Hi, The P5000V3, production batches A3515 A4615 passed the HATS test with success 500 cycles - 6 cycles Reflow 260 degrees and did not undergo more than 4% of the change of resistance. Please distribute to all those involved. Well done. Regards, "

Yehuda N. December 27, 2015

"Thank you for the excellent service!"

"Hi, I would like to thank you for the excellent service that you gave in researching the failure and the malfunction of the circuit. You carried out at our request the cross sections of the circuit and in a meeting at your site Natan and Michel gave up their time and helped us to investigate the problem in depth. At the end of the day we proved (also with the help of ultrasonic cleaning with IPA) that the problem was not within the circuit but rather on the surface. Again many thanks to everyone! "

Danny G. December 24, 2015

"It was simply great to work with Nistec!"

"It was simply great to work with Nistec. The service and warmth of Orly and of everyone that we met during the assembly was very high. Thank you very much. "

Inbal A. October 6, 2015

"Thank you for all the efforts that you invested!"

"Hi Ronny and Yvgeny Attached are photos of the board that you designed for us. The circuits are assembled and are in working excellent! Thank you for all the efforts that you invested. Yours,"

Or S. July 26, 2015

"Well done, keep going!"

"Hi everyone, I wanted to update you that the P5400V2 circuit board polymide / layer intervals 2.5 / copper filling passed the HATS tests with excellence, 1000 cycles without batting an eyelid. Well done, keep going! (Regards to Naftali who has been chasing me for two years to make a circuit board with copper filling) Regards"

Yehuda N. July 21, 2015

" I hope to continue with the fruitful cooperation!"

"During last week we received the cards from the application contractor, to date we have tested one card and it seems to be working fine. The rest of the csrds will be activated and tested in due course. I would like to thank you and the rest of those engaged in the work for their cooperation and support of the project from the first moment and until its delivery on the date determined and even slightly earlier. In particular I wanted to mention the help and contribution of Simon in coordinating the work and the production abilities of Eltek and the advise in determining the stack up. I hope to continue with the fruitful cooperation,"

Uzy B. 19 July, 2015

"Caring and professional investment!"

"Thank you very much for the caring and professional investment and the attention to the small details."

Gil C. July 16, 2015

"Looking forward to coming back and assembling with you thousands of units. Thank you!"

"I wanted to say thank you! Thank you to Michael for his professional support throughout the preparation of the circuit. Thank you to Arbel and Elad for the wonderful service and their warm interactions. A huge thank you to Olga for the dedicated and professional support throughout the assembly process and for her caring and ensuring the assembly of each and every component until the very last one although the kit was restricted with short tapes that I brought which did not have countable components. Thank you for the service and the warm dealings on the day of the assemblies and for the training and presentation of the process. Over and above the professional, efficient and speedy work, I must mention that on the day that I spent at your company during the assembly of the circuit I felt a real sense of family. In the coming two weeks we are performing tests on the circuit. I will update you regarding the progress. Looking forward to coming back and assembling with you thousands of units. Thank you!"

Alon C. June 18, 2015

"Great job!!!"

Many Thanks - you have done great job!!! I'm hope we will get 'Smooth Bring-Up'.

Yosef T. April 20, 2015

"Professional work & Personal attention"

Thank you very much for your professional work and the personal attention!

Izhak G. March 26, 2015

"Thank you very much"

"Hi Michael, Thank you very much for the advice, it seems that the Americans have something to learn (from Nistec). This is a creative solution, which enables our engineers freedom of action in planning large circuits. Thank you very much."

Zeev R. February 12, 2015